WALKER TITAN XL 8x10
The Walker Titan XL 8x10 Field camera is the latest wide angled camera which was designed following the success of the 4x5 and 5x7 XL cameras.
The body is manufactured using CNC cut ABS and as with all Walker cameras finished with a very durable non-slip coating and all fittings are made from stainless steel.
Movements are rise and fall, shift, axis tilt and swing on the front standard. The rear standard is fixed apart from focusing. The bellows are interchangeable.
This camera will take lenses from the 72XL, when using the 5x7 reducing back (optional), and lenses up to 400mm. In addition the reducing back gives the availability of using the Canham 6x17 motorised roll film holder. Other backs are available such as 4x5 or 4x10.
The focusing screen is a one piece acrylic screen with etched surface on one side and Fresnel on the other, with a separate cover glass with grid pattern.
| Titan 8x10 Specifications | |
|---|---|
Maximum Bellows Extension with standard bellows |
400mm |
Minimum Bellows Extension |
72mm |
Maximum Bellows Extension with wide-angle bellows |
250mm |
Front Tilt (either direction from centre position) |
40° |
Front Swing (either direction from centre position) |
12° |
Front Vertical movement |
90mm |
Front Cross Movement (either direction from centre position) |
15mm |
Shortest focal length with flat lens board |
72mm |
Lens Panel (Sinar type) |
139mm x 139mm |
Overall Dimensions (including knobs) |
345mm x 345mm x 165mm |
Weight |
4.5kg / 9.9lbs |
An architectural version of the Walker Titan XL 8x10 is also available with 100mm of rise on the front standard.